Help My Hot Water Isn’t Working


Hot water is wonderful, isn’t it? Just turn on that tap and hey presto! It’s just one of those day to day things that most people take for granted, and don’t realise how lucky they are to have, until all of a sudden, it’s not there!Take a cold shower? Heaven forbid! Just the thought is enough to make most people cringe! And as for a cold bath! No way!

Basically, inour homes, we simply assume that things will always be working and remain that way forever, not worrying at all about if they won’t. However, machines are machines, and thetime will ultimately come at some time in the future when they will stop working.

Check it out

Should you happen to find yourself without hot water, you’ll need to get things up and running as fast as can be, so let’s have a look at what needs to be done:

Examine the Gas, Electric and Water Supplies

  • If you have a gas or electric boiler, you should make certain that the energy supply is connected and in working order.
  • If you require a landlord gas certificate in west London consult with a renowned professional service.
  • Ensure that the water supply is still on.
  • All of these are easy to accidentally turn, and will save you a lot of bother otherwise.

Boiler Reset

Try resetting your boiler or try turning off the power to the boiler and then turn it back on again.

  • There is a chance that this just might correct the problem.


  • Nowadays, modern boilers let you change the temperature of radiators or hot water system via a simple dial.
  • Check that these have not been put to the coldest settings.
  • Attempt to kick-start your boiler by turning it up to high for a short time, and then turn them back to normal after the hot water has restored itself.

Timer and Clock

  • Do you use a timer on your boiler? If so, look to see if the clock is set at the correct time, because boilers, sometimes forgetwhen clocks go forward or back.
  • Plus, ensure that your timer has been set for the hot water to be there when you want it.

Recent Power Cut?

  • If you have had a recent power cut, the boiler may have gone back to default factory settings after power was restored, so it may not be set as it was before.
  • Check all settings and alter them as required.

Diverter Valve

  • Should your central heating be working just fine, but there is no hot waterfrom your taps, it could be a diverter valve problem.
  • If you find this to be the problem, then the diverter valve is probably defective, or could be stuck in the central heating position.

In Hot water Indeed!

Well, those are the basics, and if you need professional help, simply contact and consult with local experts in the business.

Leave A Reply